Jump to a topic in the video
- एक ग़लती, एक धमाका — Hook
- इस वीडियो में क्या सीखेंगे
- Concentrated vs dilute
- Activity 2.10 — conc. H₂SO₄ + पानी
- NaOH pellets भी गर्म
- पानी को acid में डाला तो?
- सही तरीक़ा — acid to water + stirring
- Fig 2.5 hazard sign
- Dilution का असली मतलब
- एग्ज़ाम में ऐसे लिखो
- Memory aid
- NCERT Q4, Q5 + बोर्ड-स्टाइल प्रश्न
- Revision card
Key takeaways
- Dissolving an acid or a base in water is highly exothermic.
- Always add acid to water, slowly, with constant stirring. Never add water to concentrated acid.
- Water added to concentrated acid can make the mixture splash out and cause burns, and the glass may break from local heating.
- Dilution decreases the concentration of H₃O⁺ or OH⁻ ions per unit volume.
Concentrated vs dilute
A concentrated acid has a lot of acid and very little water. A dilute acid has less acid and more water. Dilution means mixing an acid or base with water to make it weaker in concentration.
Activity 2.10: it gets hot
Take 10 mL of water in a beaker and add a few drops of concentrated sulphuric acid, swirling gently. Touch the base of the beaker: it is warm. Dissolving NaOH pellets in water also warms the beaker. Both processes release heat, so they are exothermic.
The right order: acid into water
| ✘ Water into concentrated acid | ✔ Acid into water |
|---|---|
| A little water meets a lot of acid. Huge heat forms in one spot. | A little acid meets a lot of water. The heat spreads through all the water. |
| Mixture splashes out, causes burns, glass may crack. | Safe, as long as you add slowly and keep stirring. |
Containers of concentrated acids and bases (like NaOH) carry a warning sign (NCERT Fig. 2.5) for this reason.
💡 Memory trick
"Big first, drop later." The water (big) goes in first, the acid (drops) later, and keep stirring.
✍️ Exam lines
- The process of dissolving an acid or a base in water is highly exothermic.
- The acid must always be added slowly to water with constant stirring.
- If water is added to a concentrated acid, the heat generated may cause the mixture to splash out and cause burns. The glass container may also break due to excessive local heating.
🇮🇳 आसान भाषा में (Quick revision)
अम्ल या क्षारक को पानी में घोलना बहुत ऊष्माक्षेपी है। हमेशा अम्ल को धीरे-धीरे पानी में डालो और हिलाते रहो, कभी भी गाढ़े अम्ल में पानी मत डालो, वरना मिश्रण उछलकर जला सकता है और बर्तन टूट सकता है। तनु करने पर प्रति इकाई आयतन आयनों की सांद्रता घटती है।
NCERT questions solved
Intext p.25 Q4While diluting an acid, why is it recommended that the acid should be added to water and not water to the acid?
Mixing an acid with water is highly exothermic. If water is added to concentrated acid, a lot of heat forms in a small amount of water, the mixture can splash out and cause burns, and the glass may break due to excessive local heating. Adding acid slowly to water with constant stirring spreads the heat safely.
Intext p.25 Q5How is the concentration of hydronium ions (H₃O⁺) affected when a solution of an acid is diluted?
It decreases: there are fewer H₃O⁺ ions per unit volume.
Board-styleConcentrated H₂SO₄ is diluted by adding: (a) water to acid quickly (b) acid to water slowly with stirring (c) water to acid slowly (d) acid to water quickly without stirring
(b) acid to water slowly with constant stirring.